Building water will often go to sanitary sewers, which has a lot more treatment involved than going to storm sewers, so comparing road melt to a buildings water use isn’t a perfect comparison.
As for repairs, a pothole can easily be patched on the surface relatively quickly by a road crew. A damaged pipe may need additional work such as cutting around the damage, depressurizing the entire system, and replacing the compromised section of pipe followed by a larger patch than needed for a pothole.
comparing road melt to a buildings water use isn’t a perfect comparison.
I’m not going for a perfect comparison, I’m just going for an order of magnitude. I know that sanitary sewers and storm sewers are different (in fact my city is currently in the middle of a big, multi-decade project to separate the two).
But let’s do the math anyway. So, we’re not talking about the water from a sanitary sewer being super cold here. Water leaving a treatment plant is usually around 68-95°F because that’s the temperature required for the biological reactors that break down the gross stuff. Either end of that range is substantially higher than the melting point of water, so the snowmelt flowing from the storm sewer due to this under-road heating is going to be a great deal colder at release than the treated sewage flowing from the office building.
a pothole can easily be patched on the surface relatively quickly by a road crew. A damaged pipe may need additional work
Based on the image posted here, it looks like the pipes are flexible and laid several inches below the final grade of the road (look at where the manhole covers are for an estimate of the grade). That will keep the pipes from experiencing much more mechanical action than they can handle, and they’ll be far below the level of a pothole.
They’re also installed in parallel (note the line of fittings crossing the road about halfway up the photo). Any breakage or blockage in one of the loops will be passively compensated for in other lines.
Building water will often go to sanitary sewers, which has a lot more treatment involved than going to storm sewers, so comparing road melt to a buildings water use isn’t a perfect comparison.
As for repairs, a pothole can easily be patched on the surface relatively quickly by a road crew. A damaged pipe may need additional work such as cutting around the damage, depressurizing the entire system, and replacing the compromised section of pipe followed by a larger patch than needed for a pothole.
I’m not going for a perfect comparison, I’m just going for an order of magnitude. I know that sanitary sewers and storm sewers are different (in fact my city is currently in the middle of a big, multi-decade project to separate the two).
But let’s do the math anyway. So, we’re not talking about the water from a sanitary sewer being super cold here. Water leaving a treatment plant is usually around 68-95°F because that’s the temperature required for the biological reactors that break down the gross stuff. Either end of that range is substantially higher than the melting point of water, so the snowmelt flowing from the storm sewer due to this under-road heating is going to be a great deal colder at release than the treated sewage flowing from the office building.
Oh, I forgot to answer this part:
Based on the image posted here, it looks like the pipes are flexible and laid several inches below the final grade of the road (look at where the manhole covers are for an estimate of the grade). That will keep the pipes from experiencing much more mechanical action than they can handle, and they’ll be far below the level of a pothole.
They’re also installed in parallel (note the line of fittings crossing the road about halfway up the photo). Any breakage or blockage in one of the loops will be passively compensated for in other lines.